CP331
Functional Description
ID 19947, Rev. 0200
Page 2 - 3
©
2000 PEP Modular Computers GmbH
2. Functional Description
2.1 General Information
The CP331 is a CompactPCI graphics adapter board for the use in industrial environ-
ments. It has the possibility of connecting both a VGA monitor via a CRT interface and a
digital flatpanels via an internal TTL level connector or an external LVDS connector. The
Flat Panel TTL signals are routed also to the J2 connector to provide rear-I/O connec-
tivity. In addition, with the CP331-PL variant there is the possibility to connect to an
external PanelLink interface via a special mezzanine board called PanelLink Adapter
Module.
2.2 Specifics
The CP331 is delivered with either a C&T 69000 or a C&T 69030 graphic controller. The
C&T 69000 controller chip is provided with 2MB of internal memory. It supports resolu-
tions of up to 1280 x 1024 x 16 at frequencies of 60, 75 or 85 Hz. The C&T 69030
graphic controller chip is instead provided with 4MB internal memory and a RAMDAC
with 170 MHz allowing resolutions of up to 1600 x 1200 x 16 at 60Hz or of 1280 x 1024
x 24 at 60, 75 or 85 Hz (85Hz interlaced).
