CP331
Functional Description
ID 19947, Rev. 0200
Page 2 - 7
©
2000 PEP Modular Computers GmbH
PanelLink Interface
Figure 2-4: Orientation of PanelLink Connector
Another possibility for remote flatpanel connections (up to 5m
distance) is the PanelLink interface of the board variant CP331-
PL. A small transition board, the so-called PanelLink Adapter
Module, is equipped with a PanelLink transmitter to provide this
feature. The transition board is be plugged into the internal TTL
flatpanel connector CON8. Resolutions up to SXGA quality
(1280 x 1024) are possible. The installed PanelLink transmitter
is the Silicon Image SiI150.
The front-end connector is a 20-pin Mini-Delta Ribbon (MDR)
connector which provides all required signals including the 5V
power supply line for flat-panels.
The pinouts of the PanelLink connector are shown in the following table.
N/C = Non connected.
Table 2-3: PanelLink Connector Pinouts (Transmitter Side)
Pin
Signal
Pin
Signal
1
TX1+
11
TX2+
2
TX1-
12
TX2-
3
SHLD1
13
SHLD2
4
SHLDC
14
SHLD0
5
TXC+
15
TX0+
6
TXC-
16
TX0-
7
GND
17
N/C
8
5Vt
18
N/C
9
N/C
19
DDDAT0
10
N/C
20
DDCLK0
