Operator’s manual Pentruder RS2 wall saw and Pentpak 3 HFi power pack – Original instructions
Page 39
Maintenance
WARNING!
No service or maintenance may be performed on the machine unless it
is disconnected electrically from the mains.
For the machine to remain in a condition which is always safe for operation, maintenance is needed.
The maintenance in chapter 6.1 Every day / week maintenance should be performed by the operator or a service
technician.
The machine should be serviced by a Pentruder authorized technician every 80 running hours. The service indicator
on RRC display.
Every day / week maintenance
6.1.1
Clean the machine, grease and lubricate, and check all functions
The machine should be carefully cleaned, and all functions checked and found normal before use of the machine.
If a high-pressure washer is used, the nozzle may NOT be pointed at any of the rotating parts or connectors on the
machine. Tractive recommends using a water hose with a brush and to use covers on the electrical connectors to
prevent water and dirt to get into the connectors.
Parts on the machine which require extra attention
6.1.2 Blade flange and center screw/bolts for flush cutting flange
6.1.3 Quick disconnect coupling for blade
6.1.4 Track rollers
6.1.5 Eccentric locking mechanism for handles
6.1.6 Cables and connectors
6.1.7 Remote controls
6.1.8 Arm transmission
6.1.9 Water filter on Pentpak 3
6.1.10 Transport trolley
