Pentium IN530, User Manual

Page: 33 / 55

33
3.INSTALLATION
3.5.7 Additional Connectors
Front USB Header (J24, 10-pin)
You can use either this Front USB or Back Panel USB by setting the USB Select
jumper. Following table shows the jumper settings.
USB Select Jumper
USB Select Front USB (J24) Back USB (J5-2)
JP10
WOL (Wake On LAN ) (J17, 3-pin)
This header is used for remote wakeup of the computer through a network. WOL
requires a PCI add-in network interface card (NIC) with remote wakeup
capabilities. The remote wakeup header on the NIC must be connected to the
onboard Wake on LAN header. For Wake on LAN, the 5-V standby line for the
power supply must be capable of delivering 5V
±
5% at 720mA.
WOL Ring-In
Front USB
Header
JP10 / USB Select Jumper
VGA Select