Pentium IN530, User Manual

Page: 11 / 55

11
2. FEATURES
Features Of The Motherboard
The IN530 motherboard integrates the Pentium
 
microprocessor,
memory, I/O and AGP, and is designed to fit into a Micro ATX form
factor chassis. Page 14 illustrates the Layout for the IN530
motherboard. Below lists the key features provided by this
motherboard:
Processor (+Cache)
l
ZIF Socket 7 mechanism.
l
Support 66/75/83/90/95/100 MHz Host Clock.
l
Intel Pentium® Family 90~233 MHz CPU with MMX
TM
technology or Cyrix
6X86L/MX/MII or AMD-K6/K6-2/K6-3 processor up to 450 MHz with MMX TM
technology.
l
0/512KB Write Back Direct Mapped organization, Pipeline Burst Cache soldered on the
motherboard.
Chipset
l
SiS 530/5595 AGP/PCI/ISA Chipset
l
Winbond 83877TF Super I/O Controller
l
ESS 1938 PCI 3D Audio Chip
System Memory
l
Two 168-pin DIMM sockets
l
Minimum 8MB up to maximum 512 MB with un-buffer SDRAM.
l
Support 66MHz / 100MHz SDRAM DIMM module.
Graphics Support
l
Integrated H/W 3D AGP Graphic controller (2X Mode, 133 MHz), SiS 6326 enhanced.
l
Supports AGP (Accelerated Graphics Port) for increased performance of Graphic
Displays, special 3D operations in multimedia, and higher speed to satisfy the users optical
vision.
PCI Bus Master IDE Controller
l
Two PCI Bus Master IDE Ports (Up to 4 IDE Devices) for Tape Backup machines and
CD-ROMs. Either the 5.25-inch or 3.5 inch (1.44MB or 2.88MB) floppy drives can be
used without requiring an external card. Additionally, Floppy 3 mode (Japanese standard
3.5 inch disk drive, 1.2MB) and LS-120 floppy disk drives (3.5 inch disk drive: 120MB,
1.44MB, 720K) are also supported.
l
Support Ultra DMA 33/66 MB/sec (ATA33/ATA66)
l
Support PIO Mode 3, 4, run in 17 MB/sec.(Max).
Integrated I/O