Pentalift ULTRAHOOK UHR40, Owner'S Manual

Page: 26 / 42

19
PENTALIFT EQUIPMENT CORPORATION
M065R27 August 30, 2021 1:39 PM
ULTRAHOOK UHR40 VEHICLE RESTRAINT
OPERATING INSTRUCTIONS
DOCK IS READY FOR TRUCK ARRIVAL OR DEPARTURE
The vehicle restraint is retracted in the stored position. The interior panel-mounted red light is illuminated and the
exterior wall-mounted green light is illuminated. Note: The 3-position selector switch must be in the “
DISENGAGE ”
position.
Figure 11: Inside Red Light
Figure 12: Loading Dock Vacant
TRANSPORT VEHICLE IN POSITION
1. Confi rm that the truck is centered on the loading dock and is backed fi rmly against both dock bumpers.
2. Turn the 3-position selector switch to “
ENGAGE ”. The exterior wall-mounted red light illuminates informing the truck
driver not to depart. The restraint hook lowers, fully extends, rises and retracts until the rear impact guard has been
engaged. The interior panel-mounted green light will illuminate.
3. Visually confi rm that the restraint hook has properly engaged the rear impact guard before loading / unloading
commences.
When loading/unloading frequently check the control panel green light is illuminated. When loading / unloading is
complete, turn the 3-position selector switch to the “
DISENGAGE ” position. The interior panel-mounted red light will
illuminate, the restraint hook will fully retract to its stored position and the exterior green light will illuminate indicating that
the vehicle is free to depart.
USE BY UNTRAINED PEOPLE CAN RESULT IN PROPERTY DAMAGE, BODILY INJURY
OR DEATH. READ, KNOW AND OBEY ALL OPERATING INSTRUCTIONS AND SAFETY
INFORMATION. PRIOR TO ENGAGING THE RESTRAINT, THE TRUCK/TRAILER MUST
BE CENTERED AND PARKED TIGHT AGAINST THE FACE OF BOTH DOCK BUMPERS.
INSPECT AND TEST OUTSIDE LIGHTS, INSIDE LIGHTS AND ALARM DAILY (FOLLOW-
ING THE OPERATION AND PERFORMANCE CHECK ON PAGE PAGE 17). OBEY ALL
INSTRUCTIONS, LABELS AND SIGNS PROVIDED WITH THE VEHICLE RESTRAINT.
THE VEHICLE RESTRAINT IS AN IMPORTANT SAFETY DEVICE. NEVER DISCON-
NECT POWER TO THE RESTRAINT SYSTEM WHILE THE DOCK IS IN USE. IN THE
EVENT OF A POWER FAILURE, BARRICADE THE WORK AREA TO PREVENT USE OF
THE DOCK.
NOTE: It is common for this product to be supplied in combination with other Pentalift Products. When the product
supplied with other Pentalift products it is quite common for a combination control panel to be provided. The combination
control panel will be a single control panel from which more than one product will be controlled and operated. If your
installation incorporates the use of such a common control panel then read and follow all the instructions on the panel.
If the instructions on the control panel confl ict with instructions in this manual then follow the instructions on the control
panel.