Pentalift ULTRAHOOK UHR40, Owner'S Manual

Page: 28 / 42

21
PENTALIFT EQUIPMENT CORPORATION
M065R27 August 30, 2021 1:39 PM
ULTRAHOOK UHR40 VEHICLE RESTRAINT
“OVERRIDE MODE” WHEN THE REAR IMPACT
GUARD CANNOT BE ENGAGED BY THE RESTRAINT
If the restraint member moves to within 4 inches of the front face of the pit without engaging the rear impact guard, an
error condition occurs. When an error condition occurs, the exterior wall-mounted red light will remain illuminated, the
interior panel-mounted red light will fl ash and the alarm will sound.
Figure 15: Inside Red Light Flashes
and Alarm Sounds
Figure 16: Rear Impact Guard Not Secure
Turn the 3-position selector switch to “ DISENGAGE ” to return the restraint to the stored position.
If engagement by the hook is not made and the trailer can not be repositioned to accomodate engagement, turn the
3-position selector switch to the “
OVERRIDE ” position. The outside wall-mounted red light will remain illuminated and
the interior panel-mounted yellow light will illuminate, warning the operator to proceed with caution. SECURE THE
TRAILER BY OTHER MEANS (i.e. wheel chocks).
Figure 17: Inside Yellow Light
Figure 18: Secure Trailer by Other Means (i.e. Wheel
Chocks)
WHAT TO DO IF THE VEHICLE ATTEMPTS TO DEPART WHEN RESTRAINED
If the truck/trailer attempts to drive away while the Ultrahook is still engaged, a pulsing error alarm will sound and the
interior panel-mounted red light will begin to fl ash quickly. Halt the truck/trailer and return it to the dock face. Clear the
error by pressing the “
RESET ” button. Turn the 3-position selector switch to “ DISENGAGE ” before allowing the truck
to depart.
Note:
For all other errors, the operator must fi rst press the “ RESET ” button before operations can be resumed.
(See ERROR CONDITIONS on page 25.)