Page 20
Turning Heat Pump On and Off
When the heat pump is off, the main screen will have
a black background and display “OFF” in the centre.
To turn the heat pump on, tap the power button
. The background will change to blue and the current
temperature will be displayed on the screen, indicat-
ing the heat pump is on. If you do not set a timer, the
heat pump will stay on indefinitely as long as there is
water flow. To manually turn the heat pump off, tap
the power button
. The main display will change
to a black background and display “OFF” again, indi-
cating the heat pump is off.
Setting the Temperature and Mode
The UltraTemp HXi heat pump can work in heat/cool
or auto mode. To set the temperature and mode:
1. On the main interface screen, tap the centre of
the screen where the temperature is displayed.
This will display the ‘Mode’ screen.
2. On the left hand side of the screen the mode will
be displayed. Swipe up and down over the mode
to choose between Heating, Cooling or Auto. Ex-
cept in really warm climates, Heating mode is the
normal mode to choose for heating your pool.
3. On the right hand side of the screen, the target
temperature will be displayed. Swipe up and down
on the temperature to set the desired water tem-
perature.
4. Tap OK to save the mode setting. Tap < to go back
without saving.
Configuration
Summary of Contents for ULTRATEMP HXi
Page 39: ...Page 39 ...
