Page 17
Control Panel
11
Figure 12: Control Panel
Ref Icon
Function
1
Key / Lock
Tap the key to lock the screen. Hold the padlock for 3 seconds to
unlock the screen.
2
On/Off
Tap to turn the heat pump on or off.
3
Time
This shows the current time.
4
Mode Icon
Shows whether Heating, Cooling or Auto mode is active.
5
Mute
This icon will show if the control pad is muted.
6
Timer Mode
This icon will show if the on/off timer is enabled.
7
Timed Mute Mode
This icon will show if the mute timer is enabled.
8
Fault Icon
This icon will show if there is a fault detected with the heat
pump.
9
Defrost Icon
This icon will show if the heat pump is in defrost mode.
10
Water Inlet Temperature
The current water inlet temperature (the water from the pool).
11
Water Outlet Temperature
The current water outlet temperature from the heat pump. This
should be 1-2 degrees higher than the inlet temperature.
Configuration
Configuration
Summary of Contents for ULTRATEMP HXi
Page 39: ...Page 39 ...
