manualshive.com logo in svg

Pentair S06, Instruction Manual, Page: 11 / 64

Share
Download
Pentair S06 Instruction Manual Download Page 11

© 2015  Pentair Equipment Protection

89116616

- 11 -

ELECTRICAL INSTALLATION

1.  Loosen the screw on the evaporator access panel and remove the power access panel. See Figure 9.

2.  Push the power supply wire through the strain relief.

3.  Connect the wire to the terminal block per the label.

4.  Reinstall the power access panel and screw.

5.  Tighten the screw on the strain relief to secure the supply wire, see Figure 10.

NOTE: Use a higher ampere rated circuit breaker, or time-delay fuse, that is closest to the 

nominal ampere rating of the air conditioner, or sum of the individual component ampere ratings, 

to protect the system electrical circuits from short circuit or overload.

Figure 9

Figure 10

PRINCIPLES OF OPERATION

If electrical power to the air conditioner is interrupted and reapplied, the compressor may take up to five (5) 

minutes to restart due to the high back pressure of the compressor.

NOTE: The controller includes a nominal time delay setting of 5 minutes.  Do not decrease the 

time delay setting to less than 2 minutes, as this may cause rapid cycling of the compressor, 

which may reduce the life of the compressor.

Summary of Contents for S06

































































Reviews:

No comments