background image

17

SunTouch Pool and Spa Control System Installation and User’s Guide

Schedules Menu (4/13)

Scheduled start and stop programs can be assigned to pool, spa and auxiliary circuits (AUX 1, AUX 2, AUX 3)
functions. The start and stop times can be programed to run automatically within a 12 hour period. The default
run time for a scheduled circuit is 8:00 AM to 5:00 PM which can be adjusted in 15 minutes increments. A
maximum of four scheduled programs can be setup for any one circuit, with a total of six programs for all
circuits combined.

To program a circuit:

Add a new program to a circuit

Press the 

Menu button

 to select the Schedules menu (4 of 13).

Press the 

Right button

 to schedule an available circuit.

Press the 

Up/Down button

 to select the circuit to program. The circuits are: 

Pool,

Spa, AUX 1, AUX 2, AUX 3

. If there existing programs assigned to circuits, use

these buttons to scroll through the each programmed circuit.

Press the 

Right button

 twice to move to the mode settings (

Add, Edit Delete

). To

add a program, Use the 

Up/Down button

 to select 

Add

. Press the 

Right

 button.

“Edit” is displayed (blinks on and off) and the circuit number will increment from zero
to one (1/1). At this point there are still three available circuit that can be assigned to
the circuit.

Mode settings

Add:

 Add up to four programs to the selected circuit.

Delete: 

Delete the current program

Edit:

 Move to the Start/Stop time for the current circuit program.

Set the start and stop time

Press the 

Right button

 to move to Start time setting for the circuit.

Press the 

Up/Down button

 to set the time to automatically start the circuit. Adjust

the start time in 15 minutes increments for AM or PM.

Press the 

Right button

 to move to Stop time setting.

Press the 

Up/Down button

 to set the time to automatically stop the circuit. Adjust

the stop time in 15 minutes increments for AM or PM.

Press the 

Right button

 twice to set to edit another program.

or

Press the

 Left button

 to return to the main status screen.

Main Menu      4/13
      Schedules

Schedule  [Pool    ]
Prg: 0/0  -   Add

Schedule  [Pool   ]
Start: 8:00 AM

Schedule  [Pool   ]
Stop: 4:30 AM

Schedule  [Pool    ]
Prg: 1/1  -   Edit

Schedule  [Pool    ]
Prg: 0/0   -  Add

Main Menu      4/13
      Schedules

Schedule  [Pool    ]
Prg: 0/0  -   Add

POOL    71°F / 91°F
11: 51AM   HEATER

Summary of Contents for Pool and Spa Control System SunTouch

























































































Reviews: