Pentair Pool and Spa Control System SunTouch, Installation And User Manual

Page: 24 / 88

16
SunTouch Pool and Spa Control System Installation and User’s Guide
Delay Cancel Menu (3/13)
Use the Delay Cancel feature for service or testing purposes. Normally, there is no need to cancel any of the
following delays except for servicing or testing the system. For convenience, on a onetime basis, the Delay
Cancel feature will cancel the following safety delays.
• Heater Cool-Down Delay Cancel: Shuts Filter Pump off immediately.
• 2-Speed Filter Pump five-minute START on HIGH SPEED Delay Cancel: Shifts pump to low
speed.
• Automatic Pool Cleaner START Delay: Starts Cleaner Pump immediately, without normal delay in
which the filter pump first runs for 5 minutes.
• Automatic Pool Cleaner SOLAR Delay: Allows Cleaner Pump to run even though solar delay has
shut it off for 5 minutes.
Some heaters require a cool-down cycle before being switched off. This can be setup in the menu to run the
filter pump an additional ten minutes to dissipate residual heat built up inside the heater combustion chamber.
The Delay Cancel feature is mainly for use by service technicians when it’s necessary to shut the filter pump
off immediately, and know the heater has not been running. Heaters manufactured by Pentair do not require
this cool-down period and do not need the delay to be set up.
Delay Cancel
To activate Delay Cancel:
Menu button: Press the Menu button until Delay Cancel displays.
Right button: Use the Right button activate Delay Cancel for one time only. “Delay
Cancelled” is displayed, then the Main status screen is displayed.
Left button: Press the Left button to return to the main status screen.
Main Menu 3/13
Delay Cancel