background image

15

  

L-3113 (10-15-22)     

LIMITED WARRANTY ON HYPRO/SHURFLO AGRICULTURAL PUMPS & ACCESSORIES

The Hypro/Shurflo agricultural products brought to you by Pentair Flow Technologies, LLC and its directly related affiliates 
(collectively, "Hypro") are warranted to be free of defects in material and workmanship under normal use for the time periods listed 
below, with proof of purchase.

 

- Pumps and Closed Transfer Systems: One (1) year from the date of purchase.  

     

 

- Accessories: Ninety (90) days from the date of purchase. 

This limited warranty will not apply to products that were improperly installed, misused, misapplied, damaged, altered, or 
incompatible with fluids or components not manufactured by Hypro.  This limited warranty is the sole and exclusive warranty 
provided by Hypro for the products. HYPRO DISCLAIMS ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED OR STATUTORY, 
INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTIBILITY AND FITNESS FOR A PARTICULIAR PURPOSE. 
HYPRO SHALL NOT BE LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES, INCLUDING 
BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF HYPRO 
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES), WITH RESPECT TO THIS LIMITED WARRANTY OR ANY OTHER 
MATTER RELATING TO THE PRODUCTS. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF CERTAIN WARRANTIES OR 
THE LIMITATION OR LIMITATION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CERTAIN CIRCUMSTANCES. 
ACCORDINGLY, SOME OF THE ABOVE LIMITATIONS MAY NOT APPLY. 

Hypro's obligation under this limited warranty policy is limited to repair or replacement of the product, as determined by Hypro in 
its sole and absolute discretion. This limited warranty is in lieu of all other warranties, expressed or implied, and no other person is 
authorized to give any other warranty or assume obligation or liability on Hypro’s behalf. Hypro shall not be liable for any labor, damage 
or other expense.

RETURN PROCEDURES

Buyer must give Hypro notice in writing of any alleged defected covered by this warranty within thirty (30) days of the discovery of 
such defect during the warranty period. Buyer should be prepared to give Hypro full details the defect, including the model number, 
date of purchase, and from whom you purchased your product. Hypro may request additional information, and may require a sketch to 
illustrate the problem.

Contact the appropriate Hypro Service Department to receive a Return Merchandise Authorization number (RMA#). Returns are to 
be shipped with the RMA number clearly marked on the outside of the package. Hypro shall not be liable for freight damage incurred 
during shipping. Please package all returns carefully. All products returned for warranty work should be sent shipping charges 
prepaid:

All products must be flushed of any chemical (ref. OSHA section 1910.1200 (d) (e) (f) (g) (h)) and hazardous chemicals must be labeled/ 
tagged before being shipped* to Hypro for service or warranty consideration. Hypro reserves the right to request a Material Safety 
Data Sheet from the returnee for any pump/product it deems necessary. Hypro reserves the right to “disposition as scrap” products 
returned which contain unknown fluids. Hypro reserves the right to charge the returnee for any and all costs incurred for chemical 
testing, and proper disposal of components containing unknown fluids. Hypro requests this in order to protect the environment and 
personnel from the hazards of handling unknown fluids. All returns will be tested per Hypro’s factory criteria. Where products are 
found not to be defective (under the terms of this limited warranty), then the Buyer must pay return packing and freight charges. 
Where products are tested and found to be covered by this limited warranty, then Pentair will pay for return packing and freight 
charges. Hypro reserves the right to choose the method of transportation.

*Carriers, including U.S.P.S., airlines, UPS, ground freight, etc., require specific identification of any hazardous material being 
shipped. Failure to do so may result in a substantial fine and/or prison term. Check with your shipping company for specific 
instructions.

US/CANADA

Technical: 800-445-8360
Hypro Warranty: 800-468-3428
SHURflo Warranty: 800-854-3218
[email protected]
[email protected] 
[email protected] 

EUROPE

+32 14 25 99 18
[email protected]

UNITED KINGDOM

+44 1954 262333
[email protected]

SOUTH AMERICA &

CENTRAL AMERICA

[email protected]

ALL OTHER REGIONS

HYPRO / PENTAIR

Technical: 800-445-8360
Hypro Warranty: 800-468-3428
SHURflo Warranty: 800-854-3218
[email protected]
[email protected] 
[email protected] 

                                                                                                                                                                                                                                                                                                                   

          911-1044 (03-01-22) 

Summary of Contents for Hypro ProStop-E Quad 4216N-3403VPSQ

















Reviews: