High Power Wireless Link Kit Installation Guide
6
7
Connect the High Power Wireless (HPW) Indoor Transceiver to the ScreenLogic
®
Interface Protocol Adapter as follow: See Figure 6 on page 12.
1.
Using the provided 1 ft. RS-485 cable, connect one end of the cable
plug to the Protocol adapter and the other end to the HPW Link indoor
transceiver. The cable plugs are keyed for easy connection. See diagram
below.
2.
Plug the 120 VAC Power Adapter into an AC grounded electrical outlet.
Plug the other end into the power socket on the HPW Link indoor
transceiver.
Wall Mount the HPW Indoor Transceiver (Figure 2 and Figure 3)
Mount the
Mount the HPW Indoor Transceiver on an indoor wall as follows:
1.
Cut out the wall mounting template from the next page. Place the template
on an indoor flat surface or wall and mark the two screw hole positions.
2.
Drill two holes (0.223 in) 2-1/2 inches apart as shown on the template (see
Figure 3 on next page).
3.
Insert the wall plugs into both wall screw holes.
4.
Insert the screws into the wall plug. Don’t insert the screws all the way into
the wall, leave about 1/16 in for the wireless transceiver to hang on the
head of the screws (see Figure 2 on next page).
5.
Mount the wireless transceiver onto both screw heads.
Base/Desk Mount the HPW Indoor Transceiver (Figure 1 on page 7)
Mount the HPW Indoor Transceiver in its base as follows:
1.
Insert the power cable into the base of the HPW Link Indoor transceiver
base. Fasten the cable into the cradle slot (see Figure 1 on page 7).
2.
Insert the connection cable into the base of the transceiver cradle. Fasten
the cable into the cradle slot (see Figure 1 on next page).
3.
Place the transceiver and base on a table or desk. Note: Keep the
transceiver clear of all objects for two feet. Note: Do not place the
transceiver on the floor or behind a desk.
Connecting the HPW Indoor Transceiver and Protocol Adapter
SCREENLOGIC INTERFACE
®
Connection cable (1 ft)
(provided in kit)
120 VAC
Power Adapter
HPW Indoor
Transceiver
Protocol
Adapter
High Power Wireless Link For ScreenLogic
Interface Systems
