High Power Wireless Link Kit Installation Guide
4
5
High Power Wireless Link Kit Overview
The High Power Wireless Link consists of an indoor and outdoor
902-928 MHz wireless transceiver. Note: The wireless transceivers ship
from the factory as a matched pair. The ID numbers on each transceiver
must be the same number to function correctly. If needed, the transceivers
must be replaced as a matched pair. For more information, call Customer
Support 800.831.7133.
Automation Control System: The High Power Wireless Link indoor and
outdoor transceiver provide a wireless connection between the Internet
and the IntelliCenter™, IntelliTouch
®
or EasyTouch
®
Control System Load
Center (or Power Center) located at the equipment pad which eliminates
hard wire connection from inside your home to the equipment pad.
Installation Guide
This Installation Guide provides installation instructions for the High Power
Wireless Link kit. For information about ScreenLogic Interface operation, refer
to the ScreenLogic Interface User’s Guide (P/N 520493).
High Power Wireless Link Kit
High Power Wireless Link Kit Contents
The following items show are included in the kit:
Note:
ScreenLogic Interface Protocol Adapter and Cable (purchased separately)
Mounting hardware
(screws)
Outdoor
Transceiver
enclosure
Indoor transceiver
and base
Outdoor Cable
(white - 15 ft.)
NOTE (*): ID numbers
on Indoor and Outdoor
transceiver board must
match
Power Over Ethernet Module
(Outdoor hardware)
Cable (for connection to
ScreenLogic
®
Interface
Protocol Adapter
(purchased separately)
Ethernet Cable
(15 ft.)
Manual
Outdoor Transceiver
(Cable Restrainer)
AC Power Adapter
High Power Wireless
Link PoE/Ethernet Cable
Bundle (P/N 544425)