11
figure 8 -
removal of the terminal board enclosure.
Warning
Pay attention not to damage the joint surfaces of
the cover.
Warning
Do not remove earth connection X while
connecting the actuator to plant earthing.
iMpOrtant
All the accessories which equip the F02, in
particular the cable glands, must be certified
according to the Standard Directive and specific
Rules applying to the products.
figure 9 -
overview of the electrical connections.
earth connection X
4.9 reMOVaL Of the terMinaL BOard enCLOsure
using a 5 mm allen key, loosen the four screws and remove the cover.
4.10 CaBLes COnneCtiOns
Before applying voltage to the f02 check that the electrical parameters (supply voltage and
current) shown on the nameplate and on the attached wiring diagram are correct for the
installation.
Biffi
f02 quarter-turn electric actuator
InstallatIon and MaIntenance InstructIons
