Pentair Pool Products MagicStream Laminar Installation And User Manual Download Page 4

ii

MagicStream Laminar Installation and User’s Guide

 

 

Important Notice:

Attention Installer: 

This manual contains important information about the installation, operation and safe use

of this product. This information should be given to the owner and/or operator of this equipment.

 WARNING

 —

Before installing this product, read and follow all warning notices and instructions which

are included. Failure to follow safety warnings and instructions can result in severe injury,
death, or property damage.  Call (800) 831-7133 for additional free copies of these
instructions.

 WARNING   — Risk of electrical shock or electrocution.

This MagicStream™ Laminar must be installed by a licensed or certified electrician or a
qualified pool serviceman in accordance with the National Electrical Code and all applicable
local codes and ordinances. Improper installation will create an electrical hazard which
could result in death or serious injury to pool users, installers, or others due to electrical
shock, and may also cause damage to property.

Always disconnect power to the MagicStream Laminar at the circuit breaker
before servicing the unit.

 Failure to do so could result in death or serious injury to

serviceman, pool users or others due to electric shock.

General Installation Information

All electrical work must be performed by a licensed electrician, and must conform to all

national, state, and local codes.

Install to provide drainage of compartment for electrical components.

Code requirements for the electrical connection differ from state to state. Install equipment in

accordance with the National Electrical Code and all applicable local codes and ordinances.

IMPORTANT SAFETY PRECAUTIONS

Summary of Contents for MagicStream Laminar





















Reviews: