8
MagicStream Laminar Installation and User’s Guide
2. Make sure the spare o-rings are in place. Place the union winterization plugs in the Laminar adjustment
nuts and screw them in place on the Laminar body (Figure 5).
3. Connect the Laminar to the supply pipe with the union connection (Figure 5). Make sure the o-ring
stays in its groove).
4. Adjust the laminar so that the laminar orifice is visible through the slot in the deck housing Lid.
5. Place the deck housing lid/Laminar unit in the deck housing (Figure 5). If the hoses in the deck housing
prevent the proper seating of the deck housing lid, you may have to loosen the union nut briefly and allow
the hoses to twist, so that they spiral out of the way, into the deck housing.
6. Adjust the Laminar throttling valve to ¼ open. Turn on the supply pump and let the Laminar fill with
water.
7. When a stream of water begins to flow from the laminar orifice, adjust the flow, elevation and direction
as desired.
Figure 5
Union
winterization
plug
Spare
o-ring
Laminar
adjustment
nut
Union
connection
Deck housing cover
O-ring
Laminar
unit
Deck housing
