10
MagicStream Laminar Installation and User’s Guide
LED Light Engine Features
The LED Light Engine controls the operation of the following features, and its built-in memory capability
ensures that each time you turn the light engine on, it resumes operation with the same features in operation
as when you last turned it off:
Lighting
Color freeze mode
-You choose one color of light. The color does not change.
Color changing mode
-the color of the light changes automatically, according to one the following
three programs:
Sync
- Colors will change at 10 sec intervals. In this mode, multiple
Laminars will change colors together.
Random
- Colors will change at about 10 sec intervals but in a completely random sequence.
In this mode, multiple Laminars will NOT change colors together.
Party
- Colors will change randomly and slowly at first, then speed up, until the sequence ends
with quick flashes and strobes. The sequence then repeats, beginning with the slow changes.
In this mode, multiple Laminars will NOT change colors together
Solenoid Thumper
The solenoid thumper feature creates a "wrinkle" in the laminar stream, thus creating a brilliant spot of
light in the laminar arc.
Reset
When you select the reset feature, the LED light engine reverts to the Random color changing mode
with the solenoid thumper ON.
Operating the LED Light Engine Features
You control the operation of the LED light engine features by cycling the power OFF and ON rapidly
(1SEC) in the combinations described below:
IMPORTANT: Start from the ON position.
Lighting
- cycle the power OFF/ON
2
times. Each successive OFF/ON combination will cycle
through
Sync,
Random
and
Party
.
Solenoid Thumper
- cycle the power OFF/ON
3
times to turn the solenoid thumper ON and OFF.
Reset
- cycle the power OFF/ON
4
times to reset the LED light engine.
