11
MagicStream Laminar Installation and User’s Guide
LED Light Engine Control Summary
PROGRAM
/MODE
POWER CYCLE
DESCRIPTION
INDICATION
RESET
OFF/ON/OFF/ON/OFF/ON/OFF/ON
Resets Light Engine to
Random mode and turns on
the thumper.
Flashes Light 2 times
SOLENOID
THUMPER
OFF/ON/OFF/ON/OFF/ON
Turns solenoid “thumper” ON
or OFF
Flashes Light 4 times
LOCK COLOR
OFF/ON
Locks on any selected color.
Returns to previous color
change mode.
Color is fixed
Sync Mode - Colors will change at about 10sec intervals. In this mode, multiple Laminars will change colors together. If the
solenoid thumper mode is turned on, the thumpers on multiple Laminars will thump together.
Random Mode - Colors will change at about 10sec intervals but in a completely random sequence. In this mode, multiple Laminars
will NOT change colors together. If the solenoid thumper mode is turned on, the thumpers will thump at random intervals and
multiple Laminars will NOT thump together.
Party Mode - Colors will change randomly and slowly at first, then speed up, until the sequence ends with quick flashes and strobes.
Then the sequence starts again with slow changes. In this mode, multiple Laminars will NOT change colors together. If the solenoid
thumper mode is turned on, the thumpers will thump at random intervals and multiple laminars will NOT thump together.
LED LIGHT
COLOR
CHANGE
OFF/ON/OFF/ON
Switches from one color
change mode to next. After a
Reset, Random mode is
running.
Sync Mode–1 flash
Random Mode–2 flashes
Party Mode–3 flashes
Start programming with the LED light engine ON. Change programs and modes by cycling the power ON and OFF rapidly
(1 Sec). Wait 10 seconds between MODE changes.
COLOR CHANGE MODE DESCRIPTION
