IntelliBrite
®
5g White Pool Light and White Spa Light Installation and User’s Guide
1
IntelliBrite
®
5g White Pool and Spa Lights Overview
This manual describes how to install the IntelliBrite 5g white underwater pool light and
the white spa light. The IntelliBrite white lights provides brilliant white light for a
spectacular effect in your pool and spa. The unique IntelliBrite 5g pool light lens
geometry (pool light only) provides a choice between two light beam shapes; wider
coverage with less intensity, or narrower coverage with more intensity. For more
information, see page 14.
Operating Pool and Spa Lights Using a Wall Switch (12 VAC)
The white pool and spa lights can be manually controlled using a standard wall-mount
light switch. Multiple IntelliBrite lights can be connected via a junction box to a single
switch so that all lights can be switched on and off together. IntelliBrite lights can also be
automatically controlled via Pentair IntelliTouch
®
, EasyTouch
®
and SunTouch
®
automation systems. For more information refer to the IntelliTouch User’s Guide (P/N
521075), EasyTouch User’s Guide (P/N 521044), and SunTouch User’s Guide (P/N
520785).
Using an External Transformer for Multiple IntelliBrite 12 VAC Lights
When using multiple IntelliBrite 12 VAC lights on a
300 Watt
transformer, it is
recommended that no more than three IntelliBrite pool lights and one (1) IntelliBrite Spa
light be used. It is also recommended not to exceed 100 feet of total cable run between
the transformer and light. Note: For long cable lengths, set transformer to 14 VAC (see
diagram below).
300 Watt
Transformer
J Box
12 Gauge
(minimum)
150 ft. max. for spa light
200 ft. max. for pool light
300 Watt
Transformer
J Box
12 Gauge
(minimum)
100 ft.
