IntelliBrite
®
5g White Pool Light and White Spa Light Installation and User’s Guide
8
5.
Install the IntelliBrite light assembly into the niche and tighten the special
bronze pilot screw.
Use only the
special pilot screw provided
with this
underwater light. This screw mounts and electrically grounds the housing
securely to the mounting ring and wet niche. Failure to use the screw
provided could create an electrical hazard which could result in death or
serious injury to pool users, installers or others due to electrical shock.
6.
Fill the pool until the underwater light is completely submerged in water
before operating the light.
7.
Final check for proper light operation:
To check for proper operation,
switch on the main switch or circuit breaker, and the switch that operates
the IntelliBrite underwater light itself. The light should illuminate when
power is applied. If not recheck the installation steps starting with Step 1
(page 7)
FOR INTELLIBRITE WHITE POOL AND SPA LIGHT REMOVAL AND
INSTALLATION INSTRUCTIONS SEE:
•
Replacing the IntelliBrite 5g White Pool and Spa Light
Assembly instructions, on page 4.
• Replacing the IntelliBrite White Spa Light Face Ring and
Gasket or Gasket and Lens instructions, on page 17.
Pilot screw (bronze)
IntelliBrite Spa Light
Pilot screw (bronze)
IntelliBrite 5g White Pool Light
