PENSOTTI PCH 50B-H, Instruction Manual

Page: 32 / 80

INSTALLATION INSTRUCTION
29
CAUTION : Label all wires prior to disconnection when servicing controls. Wiring errors can cause
improper and dangerous operation. Verify proper operation after servicing.
The connection to the main power supply must be carried out by professionally qualified electrical
personnel, registered in accordance with current legislation and local authorities.
Always check to make sure that the appliance has an efficient ground system. This requirement is
only satisfied if it has been properly connected to an efficient ground system installed in accordance with
the requirements of current safety standards and carried out by professionally qualified personnel.
This basic safety measure must be checked, verified and carried out by professionally qualified
personnel. Have the electrical system checked by a qualified electrician. The manufacturer will not be
held liable for any damage or injury caused as a result of an inefficient or faulty ground system.
■ Ensure the domestic power supply is checked by a qualified electrician to ensure that it can
support the maximum power absorption of the appliance, as indicated on the rating plate. In particular,
make sure that the cable sizes are adequate for the power absorbed by the appliance;
■ The power supply cable must be replaced by a qualified electrician. If the cable is damaged in any way,
switch off the appliance and have the cable replaced by a suitably qualified electrician;
When using an electrical appliance, a few fundamental rules must be
observed: Do not touch the appliance with damp or wet parts of the body or
when barefoot. Do not pull on the electric wires.
Do not allow the appliance to be used by children or anyone unfamiliar with its operation;
If the unit fails to re-start after any fault, unplug the unit for 30 seconds, then re-
plug in the unit and try to restart with the on/off switch. If the unit fails to restart,
call a qualified Technician for service.