PENSOTTI PCH 50B-H, Instruction Manual

Page: 23 / 80

INSTALLATION INSTRUCTION
20
3.4 Fixing the boiler to wall
The appliance must be installed exclusively on a flat vertical solid wall capable
of supporting its weight
.
To avoid the condensate stagnation within the condensing exchanger, make
sure that the boiler is slightly inclined to the rear (Slope = 4°) to allow the correct
draining of the condensate.
To fix the boiler to wall follow this instruction:
1. Check that the spacer A (fig.1) is installed in the boiler to ensure the correct
installation slope of 4° compared to the installation wall (fig. 2) and to avoid any
condensate stagnation within the condensing exchanger;
2. Fix the external part of the mounting bracket to wall (fig. 1) using proper screw
anchors and following the distances shown in fig.3;
3. Insert the inner guide of the mounting bracket;
4. Hang the boiler onto the special hooks;
5. Once the fixing is completed check that the 4° slope (fig. 2) is respected;