Penn P170 Series, Installation Instructions Manual

Page: 9 / 20

P70, P72, and P170 Series Controls for Low Pressure Applications Installation Instructions 9
Technical Specifications
Table 6: SPST Electrical Ratings (P70A, B, C, D, and P170A, B, C, D Type Models)
Standard Single-Phase Ratings Hermetic
Compressor
Single-Phase
Ratings
120
VAC 208
VAC 240
VAC 480
VAC
1
600 VAC
1 208/240 VAC
Motor Full-Load Amperes 24 18.7 17 5 4.8 24
Motor Locked-Rotor Amperes 144 112.2 102 30 28.8 144
Non-Inductive Amperes 22 22 22 -- -- --
Pilot Duty 125 VA at 120–600 VAC; 57.5 VA at 120–300 VDC
1. Not for compressor motor loads.
Table 7: SPDT Electrical Ratings Standard Differential Switch (P70E Type Models)
Standard Single-Phase Ratings
120 VAC 208 VAC 240 VAC
277 VAC
1
Motor Full Load Amperes 16.0 9.2 8.0 7.0
Motor Locked Rotor
Amperes 96.0 55.2 48.0 42.0
Non-Inductive Amperes 16.0 16.0 16.0 16.0
Pilot Duty 125 VA at 120–600 VAC 125 VA at 24–600 VAC
1. Rating for P70EC models only
Table 8: 4-Wire, 2-Circuit Electrical Ratings (P70G, H, J, K, and P170K Type Models)
Standard Single-Phase Ratings
Line-M2(Main Contacts) Line-M1(Auxiliary Contacts)
120
VAC 208
VAC 240
VAC 277
VAC 480
VAC
1
600
VAC
1
120
VAC 208
VAC 240
VAC 277
VAC
Motor Full Load
Amperes 16.0 9.2 8.0 -- 5 4.8 6.0 3.3 3.0 --
Motor Locked Rotor
Amperes 96.0 55.2 48.0 -- 30 28.8 36.0 19.8 18.0 --
Non-Inductive
Amperes 16.0 9.2 8.0 7.2 -- -- 6.0 6.0 6.0 6.0
Pilot Duty (for both
sets of contacts) 125 VA at 24–600 VAC; 57.5 VA at 120–300 VDC
1. Not for compressor motor loads