Penguin Computing Relion 2908GT Technical Manual Download Page 120

Page: 120 / 133

- 120 -

BIOS Setup

Relion 2908GT Chassis Manual

5-5 Security Menu

The Security menu allows you to safeguard and protect the system from unauthorized use by setting up
access passwords.

There are two types of passwords that you can set:

•

Administrator Password

Entering this password will allow the user to access and change all settings in the Setup Utility.

•

User Password

Entering this password will restrict a user’s access to the Setup menus. To enable or disable
this field, a Administrator Password must first be set. A user can only access and modify the
System Time, System Date, and Set User Password fields.

Administrator Password

Press Enter to configure the Administrator password.

User Password

Press Enter to configure the user password.

Secure Boot menu

Press [Enter] for configuration of advanced items.

Summary of Contents for Relion 2908GT






































































































































Search results

Summary of Contents for Relion 2908GT

Reviews:

Related manuals for Relion 2908GT

Brands by name

Popular brands

Penguin Computing Relion 2908GT, Technical Manual

Search results

Summary of Contents for Relion 2908GT

Reviews:

Related manuals for Relion 2908GT

Brands by name

Popular brands