Penguin Computing Relion 2908GT Technical Manual Download Page 115

Page: 115 / 133

FRB-2 Timer

Enable/Disable FRB-2 timer (POST timer).

Options available: Enabled/Disabled. Default setting is Disabled.

FRB2 Timer timeout

Configure the FRB2 Timer timeout.

Options available: 3 minutes/4 minutes/5 minutes/6 minutes. Default setting is 6 minutes.

Please note that this item is configurable when FRB-2 Timer is set to Enabled.

FRB2 Timer Policy

Configure the FRB2 Timer policy.

Options available: Do Nothing/Reset/Power Down. Default setting is Do Nothing.

Please note that this item is configurable when FRB-2 Timer is set to Enabled.

OS Watchdog Timer

Enable/Disable OS Watchdog Timer function.

Options available: Enabled/Disabled. Default setting is Disabled.

OS Wtd Timer Timeout

Configure OS Watchdog Timer.

Options available: 5 minutes/10 minutes/15 minutes/20 minutes. Default setting is 10

minutes. Please note that this item is configurable when OS Watchdog Timer is set to
Enabled.

OS Wtd Timer Policy

Configure OS Watchdog Timer Policy.

Options available: Reset/Do Nothing/Power Down. Default setting is Reset.

Please note that this item is configurable when OS Watchdog Timer is set to Enabled.

BIOS Setup

- 115 -

Relion 2908GT Chassis Manual

5-4 Server Management Menu

Summary of Contents for Relion 2908GT






































































































































Search results

Summary of Contents for Relion 2908GT

Reviews:

Related manuals for Relion 2908GT

Brands by name

Popular brands

Penguin Computing Relion 2908GT, Technical Manual

Search results

Summary of Contents for Relion 2908GT

Reviews:

Related manuals for Relion 2908GT

Brands by name

Popular brands