Penguin Computing Relion 2908GT Technical Manual Download Page 107

Page: 107 / 133

- 107 -

BIOS Setup

Relion 2908GT Chassis Manual

When SATA Type is set to RAID Mode

SATA LED locate

When this option is enabled, LED/SGPIO hardware is attached.
Options available: Enabled/Disabled. Default setting is Enabled.

Intel Rapid Recovery Technology

Enable/Disable Intel Rapid Recovery Technology support function.
Options available: Enabled/Disabled. Default setting is Enabled.

RAID Option ROM UI banner

Options available: Enabled/Disabled. Default setting is Enabled.

Smart Response Technology

Enable/Disable Intel Smart Response Technology support function.
Options available: Enabled/Disabled. Default setting is Enabled.

RAID OROM prompt delay

Options available: 2 Seconds/4 Seconds/6 Seconds/8 Seconds. Default setting is 2 Seconds.

Summary of Contents for Relion 2908GT






































































































































Search results

Summary of Contents for Relion 2908GT

Reviews:

Related manuals for Relion 2908GT

Brands by name

Popular brands

Penguin Computing Relion 2908GT, Technical Manual

Search results

Summary of Contents for Relion 2908GT

Reviews:

Related manuals for Relion 2908GT

Brands by name

Popular brands