Penguin Computing Relion 2908GT Technical Manual Download Page 119

Page: 119 / 133

BIOS Setup

- 119 -

Relion 2908GT Chassis Manual

5-4-3 BMC network configuration

BMC network configuration
Select NCSI and Dedicated LAN

Switch NCSI and dedicated LAN and send KCS command.
Options available: Mode2(NSCI)/ Mode1 (Dedicated)/Do Nothing. Default setting is Do Nothing.

Lan Channel 1
Configuration Address source

Select to configure LAN channel parameters statically or dynamically (DHCP). Do nothing option willnot

modify any BMC network parameters during BIOS phase.

Options available: Unspecified/Static/DynamicBmcDhcp. Default setting is Unspecified/Static.

Station IP Address

Display IP Address information.

Subnet mask

Display Subnet Mask information.

Please note that the IP address must be in three digitals, for example, 192.168.000.001.

Router IP address

Display the Router IP Address information.

Station MAC Address

Display the MAC Address information.

Real-time synchronize BMC network parameter values

Press [Enter] to synchronize BMC network parameter values.

Summary of Contents for Relion 2908GT






































































































































Search results

Summary of Contents for Relion 2908GT

Reviews:

Related manuals for Relion 2908GT

Brands by name

Popular brands

Penguin Computing Relion 2908GT, Technical Manual

Search results

Summary of Contents for Relion 2908GT

Reviews:

Related manuals for Relion 2908GT

Brands by name

Popular brands