11003072169 FP3694 Rev
. b
Quick reference guide
Key Function
MODE
Switches the Lite-Com Pro II on and off.
Choose between the functions in the menu.
UP (+)
Increases the level of the selected function.
DOWN (–)
Decreases the level of the selected function.
PTT
Transmits with the Lite-Com Pro II.
E
E:1 Attenuation MT7H7F4010-EU-50
E:4 Frequency (Hz)
63
125
250
500
1000
2000
4000
8000
H
M
L
SNR
E:5 Mean attenuation (dB) 16.5
17.5
22.5
30.3
34.0
33.6
37.7
33.8
E:6 St. dev. (dB)
3.2
2.9
2.7
2.9
2.5
2.8
2.0
3.7
32 dB
28 dB
21 dB
31 dB
E:7 APValue (84%)
13.3
14.6
19.8
27.4
31.5
30.8
35.7
30.2
E:2 Attenuation MT7H7B4010-EU-50
E:4 Frequency (Hz)
63
125
250
500
1000
2000
4000
8000
H
M
L
SNR
E:5 Mean attenuation (dB) 17.7
17.9
23.3
30.5
34.5
33.5
38.1
34.7
E:6 St. dev. (dB)
3.7
3.7
3.1
2.2
2.2
3.1
3.1
2.3
32 dB
29 dB
21 dB
31 dB
E:7 APValue (84%)
14.0
14.3
20.2
28.3
32.3
30.5
35.0
32.5
E:3 Attenuation MT7H7P3E4010-EU-50
E:4 Frequency (Hz)
63
125
250
500
1000
2000
4000
8000
H
M
L
SNR
E:5 Mean attenuation (dB) 15.2
16.9
22.0
30.0
34.5
33.1
36.7
34.7
E:6 St. dev. (dB)
4.0
3.7
2.9
3.3
2.6
2.4
2.0
3.3
32 dB
28 dB
20 dB
30 dB
E:7 APValue (84%)
11.1
13.2
19.2
26.7
31.9
30.7
34.6
31.3
403 – 470 MHz
MT7H7F4010-EU-50
MT7H7B4010-EU-50
MT7H7P3E4010-EU-50
Peltor
™
Lite-Com Pro II
The Sound Solution
3M Occupational Health &
Environmental Safety Division
3M Svenska AB, Box 2341
SE-331 02 Värnamo
Sweden
Phone: +46 (0) 370 65 65 65
Fax: +46 (0) 370 65 65 99
Email: [email protected]
Internet: www.3M.com/Peltorcomms
© 3M 2012. All rights reserved.
3M™ Peltor™ Lite-Com Pro II is made in Sweden by
3M Svenska AB, SE-331 02, Värnamo, Sweden.
3M, Peltor and Peltor are trademarks of 3M Corporation,
St. Paul, MN 55144-1000, USA
Please recycle. Printed in Sweden.
3M™ Peltor™ Lite-Com Pro II Product Range
MT7H7F4010-EU-50 with headband
MT7H7B4010-EU-50 with neckband
MT7H7P3E4010-EU-50 with helmet attachment
Technical Data
Frequency range:
403 – 470 MHz
Operation mode:
Simplex
Channels:
Max. 30
Channel raster:
3,125kHz and 2,5kHz
Channel separation:
12,5 kHz, 20 kHz and 25 kHz
Modulation:
2,5kHz, 4kHz and 5kHz (FM),
FM (16K0F3E / 8K50F3E)
Microphone type:
Dynamic (MT7) or electret (MT53)
Receiver sensibility:
Typical -122 dBm
Selective squelch:
Programmable (and supports CTCSS and DCS)
Output power:
200 / 20 / 10 mW ERP
Range:
Outdoors up to 3 km depending on conditions
Power consumption:
Stand-by: ca 55 mA
Receiving: ca 65 mA
Transmission:
Low power:
ca 100 mA
Medium power:
ca 115 mA
High power:
ca 200 mA
Operating time at conditions
10/10/80 TX/RX/Standby at 20°C:
Hi output power:
ca 14 hours
Mid output power:
ca 16 hours
Low output power:
ca 17 hours
Operating temperature:
-20°C to +50°C
Storage temperature:
-40°C to +55°C
Weights including ACK08 battery:
MT7H7F4010-EU-50: 540 g
MT7H7B4010-EU-50: 500 g
MT7H7P3E4010-EU-50: 540 g
ACK08 technical information
Charging time:
approx. 10-12 hours
(Level of charging indicated by voicemessage when turning on headset.)
Capacity:
3,7 V, 1350 mA, 5 Wh
Charging cable:
AL2AH (fused 200mA)
After charging cycle is finished charger automatically turns into maintenance charging mode.
ACK08 must be charged with AL2AH connected to a certified 5V SELV power supply such as FR08.
Power supply must be able to deliver a minimum of 200 mA.
E:8
E:8
E:8
Borsteler Chaussee 49 | 22453 Hamburg | Tel.: (040) 500 580 20
www.comhead.de
