DK9802C2 PV50c user manual ENG
Vers: C2 page7/38
3
Set of components
The burner is shipped with following components included:
1.
Grate (set of 2).
2.
Burner
3.
Brackets for hose 2 pc
4.
Fixating flange
5.
Ceramic seal
6.
7-pole boiler connector
7.
Hose 1m
8.
External auger’s fixating chain 1m
4
Description
PV50c is wood pellet burner for heating of domestic, industrial and public buildings. Typical setup includes
external pellet storage, external auger with hose to transport pellets from storage to burner, boiler (4)
and PV50c burner mounted to the boiler’s door.
Unique construction of PV50c allows using it in many boilers working in light oil or solid fuel or universal
boilers. Unique electric ignition and automatic choosing of per-set power levels make using the pellet
burner easier through the whole year.
Only wood pellets with diameter 6 or 8mm can be used to run the burner. Using other fuel is forbidden.
The PV50c burner is connected to the boiler with a standard 90 mm oil burner flange.
The burner is equipped with a safety thermostat, a melting hose, temperature sensor and back up battery
for protection against back-burning.
Setup components are depicted in Figure 1.
8
