DK9802C2 PV50c user manual ENG
Vers: C2 page31/38
END BLOW
WAITING
Flame is not recognized during END BLOW TIME (par27) and BURNER is set ON.
STOPPED
Flame is not recognized during END BLOW TIME (par27) and BURNER is set OFF.
P08 FLAME
State has lasted for more than 20 minutes.
STOPPED
WAITING
BURNER is set ON.
10
Error messages and solutions
Error messages, error codes, their descriptions, explanations and ways of their elimination are described
in “DK0391 - Software and problem handling manual for PV PV20...500 burners”.
11
Restoring factory parameters
In order to restore factory /default settings select PAR99 and click OK, model of burner starts to blink,
click OK again.
12
Additional devices for PV burners
Аdditional devices what is possible to install to PV serial burners are described in document “DK0009 -
Additional devices for PV burners”.
It is possible to install following devices to PV burners:
1.
Flue gas fan
2.
Multipurpose ERR relay output
3.
External boiler temperature sensor
4.
External boiler pressure sensor
5.
Internet module
13
Table of parameters
Closer description of parameters is given in “DK0391 - Hardware and problem handling manual for PV
PV20...500 burners”.
