background image

DiSPoSaL oF the DeVice
According to the provisions of Directive 2002/96/EC the bat-
tery module is to be considered as belonging to the category 
of  WEEE  (Waste  Electrical  and  Electronic  Equipment):  it  thus 
cannot be disposed of as unsorted municipal waste. At the end 
of its lifetime, the device must be taken to one of the separa-
te waste collection centres for waste electrical and electronic 
equipment from households. Make reference to the collection 
centres in your town or city, which assures that suitable, ac-
cessible, functional separate collection systems are set up to 
enable  end  consumers  and  retailers  to  dispose  of  the  waste 
produced within the municipal territory free of charge.

inFoRMation aboUt PRoPeR USe
The  battery  module  is  supplied  for  the  purpose  of  operating 
Pellini “F Touch” blinds with an internal motor (or external motor 
on other systems). 
Any use for other than the intended purpose is to be considered 
improper use. 
The manufacturer accepts NO liability for damage caused by 
improper use.

SaFetY inFoRMation
WARNING! It is essential to keep and follow the following 
instructions to ensure people’s safety!
The device must not be used by children or individuals with 
physical, sensory or mental impairments.
The device must also not be used by individuals who have no 
experience or knowledge about how it is used without the su-
pervision of a person responsible for their safety.
The device is not a toy: keep it out of children’s reach!
DO NOT force the device to work if any repairs or adjustments 
are needed. 
DO  NOT  attempt  any  do-it-yourself  repairs:  repairs  must  be 
carried out by authorized personnel only.
DO NOT leave the module unattended while the batteries are 
charging.
DO NOT throw spent batteries into a fire: they could explode.
DO NOT open or perforate or short circuit the batteries.
Use only NI-MH rechargeable batteries.
WARNING! THE USE OF UNSUITABLE BATTERIES MAY CAU-

12

Summary of Contents for ScreenLine SL 2380

















Reviews: