4. Insert the new batteries, paying attention to the direction
of insertion indicated on the bottom of the battery com-
partment. To avoid the risk of damaging the module, do
not touch the exposed electronic parts.
5. Before inserting the last battery, be careful not to rest
your hand or any other object on the sensitive area since
as soon as all the batteries have been inserted the mo-
dule will become ‘live’ and immediately and automatical-
ly carry out a recalibration. If the module is not working
properly, carry out the recalibration procedure.
6. Place the cover back on the battery compartment
7. Fit the battery module back onto the support
WARNING! It is essential to keep and follow the following in-
structions to ensure people’s safety!
• Use only rechargeable “AA” 1.2V 2700 mAh NI-MH bat-
teries of good quality.
• Do not use lithium, alkaline or lead-zinc batteries. The
use of these types of batteries may damage the device,
cause leakage of acid substances and generate a fire ha-
zard
• Do not use batteries of different capacities or brands
together and always replace all three batteries simulta-
neously.
ANY FAILURE TO OBSERVE INSTRUCTIONS OR TAMPERING
WITH THE BATTERY MODULE WILL INVALIDATE THE WAR-
RANTY.
DiSPoSaL oF batteRieS
Spent batteries must be safely disposed of in the special waste
containers or collection areas provided (refer to the regulations
in force in the town or city where they will be disposed of). The
batteries must be removed from the device before their dispo-
sal. If any acid leaks from the batteries, take them out, gently
clean off any traces of liquid present on the PCB or contact
plates using a soft cloth and alcohol and replace the old batte-
ries with new ones.
11
