PB-1525 Wood Pellet Burner System: Installation and Operation Manual
Rev 1.0, OCTOBER 2011
Page 14 of 67
must be positioned such that:
a.
The overhead anchor point must be able to continuously
support a minimum of 100 pounds. See Figure 2.3 below
b.
The conveyor must be mounted such that the drop tube is a
minimum of 15-inches above the PB-1525 pellet feed tube
opening (Max 30-inches) See Figure 2.3 below
c.
The conveyor must be mounted such that the drop tube is a
minimum of 6-inches laterally away from the PB-1525 pellet feed
tube opening (Maximum of 12-inches). See Figure 2.3 below
Figure 2.3: Conveyor mounting details.
WARNING!
The pellet feed conveyor assembly can weigh as much as
100-pounds when in operation and filled with pellets.
Ensure a suitable overhead anchor point from which to
hang the conveyor.
Do not direct-couple the conveyor drop tube to the PB-
ANCHOR
POINT
15-30”
6-12”
CONVEYOR
CHAIN/CABL
E
40-50º
