pellenc HELION 3, Operating Instructions Manual

Page: 14 / 36

ELECTRIC HEDGE TRIMMER HELION 3
54_161520-B
4.3. MOUNTING THE BLADE
Caution
Before working on the tool, check that the battery is switched off and then disconnect the power
cord from the battery.
1. Retrieve three M5x25 screws from the zip bag sup-
plied with the tool.
2. Locate the motor shaft over the safety casing and
the reducer over the hedge trimmer blade.
3. Position the motor shaft halfway into the reducer.
4. If necessary, rotate the blade slightly to align it with
the safety casing.
5. Attach the blade with the three M5x25 screws.
Important
Tightening torque: 4 N.m.
Caution
Only ever use blades supplied by PELLENC to avoid the risk of injury.
Warning
Running-in of the blade must be done for 1 minute at each change of the blade in a dry run.
Check the tightness of the blade after running-in.
14