pellenc HELION 3, Operating Instructions Manual

Page: 15 / 36

ELECTRIC HEDGE TRIMMER HELION 3
54_161520-B
4.4. POSITION OF THE HANDLE
1. Press and hold the handle rotation button (9) to un-
lock the handle rotation.
2. Rotate the handle to the desired position and re-
lease the button.
Note
The handle must be placed in one of the 5 lock po-
sitions in order to work.
4.5. CONNECTING PELLENC BATTERIES TO THE TOOL
Important
Always check the remaining battery-life before use. If necessary, recharge the battery using the charger.
To prolong the life of the connectors, it is advisable to protect them when they are disconnected. Avoid leaving
them in contact with abrasive or dirty surfaces, or subjecting them to significant impacts (falls).
For more information on PELLENC batteries see the battery instructions.
1. Install the battery and the power cord on the har-
ness, refer to the assembly sheet supplied with the
harness.
2. Check that the power cord is properly connected.
3. On the right chest strap of the harness, connect the
adapter cord (part number 57238 for 750 battery,
57248 for Alpha 520 battery) to the power cord quick
connector (7) of the Electric hedge trimmer.
15