pellenc HELION 3, Operating Instructions Manual

Page: 22 / 36

ELECTRIC HEDGE TRIMMER HELION 3
54_161520-B
6.3. ANNUAL OVERHAUL
Important
Have your machine serviced every 200 hours or at least once a year by a PELLENC authorised distributor.
Always stock the tool clean and in a dry place, with the battery charged.
These parts must be replaced as a precautionary measure or at least once a year:
Name Reference
Protective plate 71297
Hedge trimmer screws and fittings kit 120445
Anti-kickback guard 117524
Hedge trimmer blade strip
117541 (L 51)
117542 (L 63)
117543 (L 75)
Seal 71306
6.4. TIGHTENING BLADES
Caution
Always disconnect the hedge trimmer from the battery before working on the blades.
Caution
Wear protective gloves when working on the blades.
Danger of accidental cuts.
The tightening of the blades is very important. This directly influences consumption (battery life).
1. Tighten the screw with a torque screwdriver.
Note
Tightening torque: 3 N.m.
22