33
5 The electric hob
5.4 Faults
If the appliance does not work properly, this does not always mean that it is defective.
Try to deal with the problem yourself fi rst. Phone the service department if the advice
given below does not help. Only authorised personnel may open the appliance or carry
out work on the mains power supply. Damage caused by incorrect connection, incorrect
installation or incorrect use is not covered by the warranty. In the case of faults visit the
internet site ‘www.atagservice.nl’.
FAULT
CAUSE
SOLUTION
Hot plates do not get hot.
Plug not, or not completely,
in the socket.
Fuse(s) in the meter
cupboard defective.
Put the plug into the socket.
Check the fuses in the
meter cupboard.
