Warranty
The warranty is valid within one year from the
purchase date. Maintenance of the snowcutter
should be performed in accordance with the
instructions provided in this manual.
The warranty does not cover:
• the snowcutter shaft, spark plugs, air filters and
chains, because these are spare parts, which wear
down during normal use;
• failures occurred out of ignoring the manual or
careless use of the snowcutter, as well as non-
compliance with regular cutter maintenance
recommendations.
The warranty service is carried out when returning
the snowcutter to the nearest equipment warranty
service center.
Safety measures
Failure to follow safety
measures and ignoring
the manual of the
snowcutter can cause
serious injury.
ATTENTION
Before operation
Before operation, carefully read all instructions.
• Operation of the equipment is only allowed to
users who read the manual. They must be able
to follow the operating instructions and safety
guidelines.
• Make sure that there are no unauthorized persons
in working area, especially small children and pets
during operation of the snowcutter.
Preparation
Before operation carefully examine the area where
you intend to use the snowcutter and remove
Page 6
foreign objects.
• Disengage all controls before starting the
engine.
• Always wear suitable clothing before starting
the work with the snowcutter.
• Be careful with the fuel.
• Use a canister to fuel store.
•
Never fill the fuel tank when the engine is
running.
•
Observe safety precautions when filling the
fuel tank on the street. Never tank up the fuel
while being inside.
• Tighten the gas tank cap securely and wipeaway
any spilled fuel before starting the engine.
• Do not attempt to adjust the engine while it is
running (unless the manufacturer specifies it
otherwise).
• Check the hydraulic oil level.
• Perform a visual inspection of cutting shaft
bearing tension bolts.
• Set all control levers in the neutral position.
