Feature and operation concept
Snowcutter «Snowmatic» system
1.Engine
2.Hydraulic tank, oil level and temperature indicator
3.Oil filter
4.Hydraulic pump
5.Two hydraulic cylinders
6.Hydraulic motor
7.Hydraulic valve
8.Snowcutter shaft lift boom
9.Snowcutter shaft
10.Finisher
11.Skids
12.Track setters
13.Drawbar
The snowcutter «Snowmatic» has a gasoline engines. The engine tightening torque (1) is transferred
to the hydraulic pump through a flexible coupling. The hydraulic pump builds up the pressure and
actuates working bodies of the cutter (hydraulic lift and tilting cylinders, cutter rotor hydraulic motor).
The snowcutter «Snowmatic» has three hydraulic system control levers (raising/lowering, tilting,
cutter rotating).
The engine oil level is controlled by using an oil gauge, located in the right engine cover (see in the
direction of travel).
The indicator, located at the hydraulic tank (2) of the snowcutter, controls the hydraulic oil level and
hydraulic oil temperature.
Page 5
