Page
15
of
46
User Manual PTCarPhone
5
Series
Instructions for Mounting
Types of connection:
Additional Required Hardware
GSM or UMTS antenna
Model-specific GSM or UMTS antenna with FME con
-
nection (not in scope of supply).
GPS antenna for devices with optional GPS
GPS antenna with SMA connection (not included in the
scope of supply). Power supply:
3 .3
V, max.
50
mA;
SIM card
Mini SIM card with mobile phone contract with phone
and data plan. This is available from your mobile
phone provider.
TIPS
:
If the PTCarPhone should be operated with the
same telephone number as the mobile phone of
the user, it is recommended to use a so-called
multi SIM card. For this, contact your mobile phone
provider.
It is recommended to make sure before assembly,
whether the electronics box should be positioned
so that easy access to the SIM card is provided.
Screws and adhesive tape
Depending on the installation situation it can be
necessary to fasten the electronics box, the handset
and the accessories with other fastening material than
that which is partially supplied. Please do not forget:
Safety first! Nevertheless, it is recommended to pay
attention to aesthetics.
Key connection
I/O
GND
Relay connection
U
B
+
I/O
Accessory Mounting
Line-out connection
The line-out cable offers the possibility to link-up
the PTCarPhone directly to the sound system or the
radio of the vehicle. In this case, the included speaker
doesn’t need to be installed.
A galvanically isolated line-out connection enables the
integration of the PTCarPhone to the audio system of
the vehicle.
Connection specifications:
4
3
2
1
8
7
6
5
1
LSPK - (blk)
5
LSPK + (wht)
2
Line-out - (gy)
6
Line-out + (gy)
3
GND (blk)
7
Ignition (yl/blk)
4
Permanent
positive (rd)
8
Radio mute (vi)
Cable set connection
(Top view)
The crimped contacts of the two grey strands of the
accessory package are pushed into the two free slots
no.
2
and
6
of the cable set plug and can be extended
as needed.
I/O cable installation set
CAUTION:
The respective operating voltage of the vehicle elec-
trical system is applied to the I/O connection. Please
keep this in mind when selecting your I/O components.
The six programmable inputs and outputs of the
PTCarPhone offer the possibility of the phone being
used as a control unit for vehicle accessories. The ac-
cessory set contains
12
strands and a plug housing. The
crimped contacts of the strands are pushed into the
plug housing as needed.
Connection specifications:
12
6
5
4
3
2
1
11 10
9
8
7
PIN
Signal
1, 2, 3
GND
4, 5, 6
U
B
+
7
to
12
I/O
1
to
6
I/O connection
(Top view)
