Page
10
of
46
User Manual PTCarPhone
5
Series
Introduction
11 .
This process is repeated for more phone numbers if
necessary.
12 .
End the process with the
OK
function key. The mes-
sage “Entry saved” is displayed.
Calling a Contact
Phone book
>
paging
>
Call key
1 .
Press the navigation key
, the phone book opens.
2 .
Scroll with the navigation keys
and
until the
contact to be called is marked.
3 .
Press the call key
, the phone book entry for the
selected contact opens.
4 .
Select the desired phone number with the naviga-
tion keys
and
(business
, mobile
or
private
).
5 .
Press the
OK
function key.
6 .
First the message “Dial number” appears on the
display and after the connection the message “Con-
nected with”.
NOTE
:
When you take the handset out of the cradle, a call can
be made in private mode with the handset. When
the handset is hung in the cradle, hands-free mode
is activated.
Adding Phone Number to Contact
Phone book >
function key
Options
> Edit contact
1 .
To open the phone book, press the navigation key
.
2 .
Scroll with the navigation keys
and
, to select
the contact.
TIP
:
The phone book shortens when you input the first
letter, or several letters, of the searched name with the
input keys
.
3 .
Push the
Options
function key when the desired
contact is marked.
4 .
Select “Edit contact” with the navigation key
.
5 .
Press the
OK
key.
6 .
Press the
Next
function key.
7 .
Select a free phone number category with the
navigation keys
and
(business
, mobile
or
private
).
8 .
Enter the new phone number with the input keys
.
9 .
Press the
OK
key. Editing is completed and the
contact is saved.
General Tips
Always enter phone numbers as follows
+[country code][local area code][phone number]
Example: +
491711234567890
Inserting special characters (* and P) for pauses and
other functions: By repeatedly pressing the * key,
pauses and other functions can be initialised.
The symbols represent the following functions:
*
= For GSM commands, device codes or DTMF
tones (example: *#
06
# or *
135
#)
P
= Sends the “pause” command via DTMF
