VISION
TOUCH
PAN
Pag. 9
USER AND MAINTENANCE MANUAL
Rev. 01-19
GENERAL RULES FOR THE INSTALLER
1.
If the program is used in applications with the risk of harming persons, machines or
materials, it must be coupled with auxiliary alarm devices.
2.
The programmer must NOT be installed in environments with dangerous atmospheres
(flammable or explosive); it can only be connected to elements which operate in this
atmosphere by means of appropriate and suitable types of interface compliant with
safety standards in force.
3.
Install the appliance in places which respect the degree of protection.
4.
Avoid using multi-pole cables with conductors connected to inductive and power
conductors and signal conductors like probes and digital inputs.
5.
Avoid housing power cables in the same conduits as signal cables (probes, digital or
analogue inputs, communication cables).
6.
Minimize the length of the connecting cables to prevent these from coiling up and
adversely affecting the electronics through induction.
7.
All the conductors of the cables must be of an appropriate size to withstand the required
load.
8
. Place a general protection fuse upstream the electronic controller.
9
. Provide a two-phase disconnecting switch compliant with foreseen safety requirements
(CE marked) to shut off the power supply upstream the controller. The switch must be
placed in the immediate vicinity of the regulator and must be easily reachable by the
operator.
10.
Should the length of the probes need to be extended, it is necessary to use conductors
with an appropriate cross-section and however no less than 1mm
²
. Extension or
shortening of the probes may alter the factory settings; use an external thermometer,
therefore, for testing and calibration.
11.
When using the console at low temperatures there could be a visible slow down in the
response from the display; this can be considered normal.
STANDARD EQUIPMENT FOR ASSEMBLY AND USE
The
VISION TOUCH PAN
electronic controller is provided with the following for assembly
and use:
• 2 temperature probes;
• 1 plug telephone cable (5m);
• 1 user quick guide;
• 1 Vision Touch PAN (200VTOUCHPAN) console;
• 4 media for Vision Touch console;
• N° 1 100N MASTER3 (200100NMSTH3);
CHAPTER 2: INSTALLATION
2.2
2.1
