VISION
TOUCH
PAN
Pag. 5
USER AND MAINTENANCE MANUAL
Rev. 01-19
GENERAL INFORMATION
DESCRIPTION:
VISION TOUCH PAN
enables advanced control of retarding cells, cabinets or counters
with temperature and humidity control.
The system consists of the 100N MASTER3 unit, on which all the electrical connections
are made, and the VISION TOUCH PAN control console, equipped with 7'' TFT display
with capacitive touch screen combined with a highly advanced software and a highly user
friendly interface that allows easy use.
APPLICATIONS:
-
Retarding cabinets, counters and cells for industrial and in-store bakeries and
confectioneries.
-
Replacing other retarding controls on existing systems.
TECHNICAL SPECIFICATIONS FOR RETARDING:
-
Hot manual mode (leavening)
-
Cold manual mode (accumulation)
-
Manages automatic retarding programs that can be customised, consisting of a
maximum of 9 steps that can be set (2 accumulation phases, 3 preservation phases, 3
leavening phases and 1 resting phase); the following is possible for each phase:
Enable its operation (with the exception of Preservation phase 3 that is always present);
Set the functions enabled in the phase (Cold
, Hot
, Humidify
and Dehumidify
);
Phase duration, Temperature setpoint and Humidity setpoint;
Select the evaporator fan speed and continuous fan forcing;
Switch to enable temperature threshold management, below which humidity control is
inhibited;
Switch to enable defrosting for the accumulation and preservation phases. (At the
beginning of the leavening phase, a defrosting phase is launched, if enabled, and this is
then inhibited during the leavening and resting phases);
Switch to enable the gradual increase to reach the Temperature setpoint (only for the
leavening phases).
-
Possibility of enabling a warning for the end of program and oven advance ignition
command.
-
Store up to 12 programs in the internal memory with the option of exporting them to a
USB or microSD.
-
Diagram of the program in execution with progress display (completed phases, phases
in progress and phases yet to be executed) and a representation of the set values and
of all the remaining times.
-
Temperature adjustment range: -45°C/+99°C; humidity adjustment range: 0-100 R.H.%
CHAPTER 1: INTRODUCTION
CHAP. 1 - Introduction
1.1
