VISION
TOUCH
PAN
Pag. 73
USER AND MAINTENANCE MANUAL
Rev. 01-19
- Digital outputs test
The “Digital outputs test” allows to manually force the digital outputs of the connected
100N MASTER
3. Access to this menu put the control unit in “Stand by”: the time progress
of an ongoing program is not altered but all output functions are disabled.
The function associated to each digital output can be set in “Parameters” => “Configure
I/O” => “Digital outputs”.
- Digital inputs test
The “Digital inputs test” allows to verify the correct acquisition of the digital inputs of the
connected 100N MASTER3. The function associated to each digital input can be set in
“Parameters” => “Configure I/O” => “Digital inputs”.
Press to enable / disable
a digital output
Connection
terminals
Output function
(can be set)
