Installing the AI device
1
2
3
4
5
6
7
8
9
10
11
12
13
14
3
2
5
6
9
14
3
Divided
in-half motion
CAUTION
CAUTION
Always turn off the power, unplug the machine from the outlet
and then only well-qualified technicians should install the AI device.
1.
Fit spacer
1
onto link
2
.
Then install them to differential feed lever
3
.
(Fig.1)
2.
After securing the link
2
to differential feed lever
3
, attach
bracket
5
to the table with wood screws
6
.
Check to see if lever
4
moves smoothly.
(Fig. 2)
3.
Connect lever
4
to motor
11
with links
7
and
8
.
Center screws
9
in each slot
10
.
Tighten screws
9
temporarily.
(Fig. 3)
4.
Install motor
11
to the table with wood screws
12
.
Adjust differential feed lever
3
so that lever
13
does not touch
support
14
(two points) when differential feed lever
3
is at the
top or bottom of its travel. Adjustment is made by loosening
screws
9
. (Figs. 3 and 4)
Note
To install motor
11
in position, links
7
and
8
should form a straight
line as seen from below.
After this installation, check to see if motor
11
moves smoothly.
