Before entry
増
増
INC.
INC.
減
減
DEC.
DEC.
TEACHING
TEACHING
ティーチング
ティーチング
設 定
設 定
INPUT
INPUT
増
増
INC.
INC.
減
減
DEC.
DEC.
設 定
設 定
INPUT
INPUT
1 : 1
ON
OFF
ON
1.
Initializing the AI device
Note
There is no need to initialize the device except when data is
garbled or reset entered data.
CAUTION
CAUTION
Since the power is turned on when initializing the AI device,
the machine could start unexpectedly. To prevent accidents,
perform the following procedures very carefully.
Make sure cords and air lines are connected properly first.
Then turn on the machine.
Turn on the power box while pressing INC. and DEC. keys
▲
･
▼
simultaneously.
The screen displays
.
Then all the sewing data is initialized.
(Refer to the sewing data preset at the factory before shipment.)
Note
Even if the AI device is initialized, the language mode is not
changed.
2.
To initialize the differential feed amount
After the initialization of the Al device has been completed, initialize
the differential feed amount.
Note
There is no need to initialize this amount at start-up every day.
Be sure to initialize it when you use this device for the first time.
Otherwise the device will not function correctly with the entered
data.
1.
Turn off the power of the
power
box.
2.
Turn on the power of the
power box
while pressing TEACHING
and INPUT
keys simultaneously.
3.
"A.I. Initialization " appears on the screen.
appears on the screen.
4.
Set the standard position of the differential feed lever with
INC.
▲
or DEC.
▼
key.
※
If the differential feed lever is to be placed at the standard
position with no differential feed effectiveness, set the
differential feed lever at
1 : 1
.
After this adjustment, press INPUT
key.
CLEAR ALL DATA
ｾﾞﾝﾃﾞｰﾀ ｼｮｳｷｮﾁｭｳ
A . I .
I n i t i a l i z a t i o n
S e t t h e F e e d
t o S t a n d a r d
several second later
