
7
BOILER SET-UP
A. GENERAL
1. PureFire boilers are intended for installation in an area
with a floor drain or in a suitable drain pan. Do not
install any boiler where leaks or relief valve discharge
will cause property damage.
2. The PureFire boiler is not intended to support external
piping. All venting and other piping should be
supported independently of the boiler.
3. Install the boiler level to prevent condensate from
backing up inside the boiler.
B. FLOOR STANDING INSTALLATION
1. For floor standing installations, use the leveling feet to
assure that the boiler is completely level. This will
prevent condensate from backing up in the boiler.
2. Be sure to leave adequate space for condensate
piping or a pump if required.
2. BOILER SET-UP
This boiler must be installed level to prevent
condensate from backing up inside the boiler.
CAUTION
Summary of Contents for PUREFIRE PFW-199
