Peco 54131501, Operator'S Manual, Page: 7 / 46

7
Figure A
Remove Existing Bolts
Before Installation
Figure B
Leave Open for
Mount Arm Assy Installation
Right Side View
Side Frame Bracket Installation
Note: It is recommended to start on either the Left or the Right side of the mower and completely install both Side
Frame Brackets (Item #1) before installing the Rear Frame Bracket.
Starting on one side, remove the (3) bolts located on the side of the mower’s rear end bumper. Refer to Figure A.
Position the Side Frame Brackets (Item #1) on either side of the mower as shown in the figure below.
Secure the Side Frame Bracket to the Left of the mower using (3) 3/8”-16 x 1-1/4” Carriage Bolts (Item #2) and (3)
3/8”-16 Ny-Flange Lock Nuts (Item #3). Refer to Figure B. To secure the Side Frame Bracket to the Right side of the
mower, repeat the process but leave the bottom bolt hole empty for the installation of the Mount Arm Assembly. See
Figure A.